12-24 VAC/VDC 100mA

1 gang for K0 option or 2 gang for K1 or K6 options, 2.5” deep

• 80dB at 3 feet

1 year

12-24 VAC/VDC 250mA

2 gang for K0, K1 and K2 options or 3 gang for K3 and K4 options, 3.5” deep

• Selectable 96db or 103 dB

1 year

0 sec to 90 minutes

12-24 VAC/VDC 200mA

2 gang 2.5” deep

103 dB

1 year

No, please use ES411 or ES4200

12-24 VDC 500mA

2 gang for K0, K1 and K2 options or 3 gang for K3 and K4 options, 3.5” deep

1 year

12 VDC 500mA

1 gang 3.0″w x 4.6″h x 2.5″d – ES610, ES611
2 gang 4.6″w x 4.6″h x 2.5″d – ES612, ES613, ES614, ES615, ES620, ES621
3 gang 6.4″w x 4.6″h x 2.5″d – ES622, ES623, ES624, ES625, ES630, ES631
4 gang 8.2″w x 4.6″h x 2.5″d – ES632, ES633, ES634, ES635

1 year

No

No

Yes

12-24 VDC 500mA

80 inches

The turnstile needs a 1 second contact closure from the access control system.

Mild Soap and water only. Never use ammonia based cleaners.

Yes

1 year

12 VDC 1 Amp

The optical beam path becomes partially obstructed by dust accumulations or scratches. Clean IR Plexi-glass with mild soap and water.  Replace Plexi-glass when needed

The turnstile needs a 1 second contact closure from the access control system.

Mild Soap and water only. Never use ammonia based cleaners.

3 years, 4^th year with commissioning

• 24 VDC 4 Amps

The turnstile needs a 1 second contact closure from the access control system.

Mild Soap and water only. Never use ammonia based cleaners.

The optical beam path becomes partially obstructed by dust accumulations or scratches. Clean IR Plexi-glass with mild soap and water. Replace Plexi-glass when needed

Check sensor alignment

Tighten or replace arm/motor coupler

3 years, 4^th year with commissioning

24 VDC 10 Amps

The turnstile needs a 1 second contact closure from the access control system.

Mild Soap and water only. Never use ammonia based cleaners.

The optical path become partially obstructed by dust accumulations. Clean IR Plexi-glass with mild soap and water.

Tighten upper hinge set screw. See page 19 of the instructions.

Check sensor alignment

3 years, 4^th year with commissioning